Wholesale Wall Mounted Wooden Pegboard Shelf for More Storage Space
Pegboard with accessories
Fusion Lock and an interlocking design with male and female prongs that provide a secure fit for adding additional pegboard sections for more storage space.
Holds 50 lbs of evenly distributed weight, if properly installed. Includes 15 built-in standoffs to space pegboard perfectly away from the wall.
Ideal for garages, basements, workshops and craft rooms.
-Fusion Lock ensures a perfect mount when you add another
-Pegboard left or right,above or below
-Perfect for any room in the house
-Easy to assembly
-All installation hardware included
Conventional painting of MDF Raw
Stop all nail holes and imperfections with a suitable timber filler and acrylic blade filler and allow to dry. Lightly sand all surfaces to
be coated so as to obtain a smooth and even finish. Dust off all sanded surfaces using a damp rag before painting commences.
For conventional painting, the recommended type of undercoat or primer is a water based acrylic type. Apply the coating in
accordance with the manufacturer’s instructions. When dry, all painted surfaces should be sanded smooth. It is recommended that
acrylic undercoats should not be watered down prior to use.
Ideally, an acrylic coating is selected as the top coat. However, as some formulations in this generic type can be found to be
unsuitable in certain applications, as in the case of doors and architraves of high wear areas, an oil or alkyd base type may be
Application of topcoat
To achieve the best appearance in finish, spray application is recommended to be carried out in as dust free circumstances as
possible. Conventional brush and roller applications can also give a satisfactory result.